Volkswagen Golf Quiz
General information, paint

Blender

In this manual: General information, paint
General body repairs, exterior — 230General body repairs, interior — 279General information, paint — 133Vechile- specific paint information — 27Heating, air conditioning — 156Auxiliary heater — 58Air conditioning system with refrigerant R134a — 1297- speed dual clutch gearbox 0CW — 544- cylinder injection engine(1.4 1 direct inction. turbocharger) — 182Fuel supply system - Petrol engines — 59Running gear, axles, steering — 221Brake system — 92Wheels and Tyres guide — 12Guide for using trailers — 11Wheels and Tyres Guide - General Information — 121Brake system (hybrid) — 73Electrical system — 326Communication — 65Electrical system, general information — 111
~2min read

Designation:

Blender -LLS MAX 009-

Issued 10.2008

Product description

The blender -LLS MAX 009- is used to achieve homogenous paint transitions in the blending/edge areas between the existing and newly applied paintwork. The raw material basis is a combination of specific resins and solvents.

Properties:

Aerosol formulation made for this specific product for easy application.

Constant atomisation pressure.

Finest aerosol dispersion.

First-class painting results.

Ideal for spot repairs.

Quick and easy to use.

Especially suitable for blending-in of 2-coat paints and single-coat 2-pack paints.

Very good partial dissolving properties.

Easy to polish.

Smooth transitions in blend-in area.

Technical data sheet

Application

Recommended for:

Spot repairs, blending

Suitable substrates:

Apply right after spraying with 2-pack clear coat -LLS MAX 210- or 2-pack top coat on the transition zones in the blend-in area. The substrate in the fading edge transition zone should be generously matted with an abrasive pad (P2000 to P4000 grade).

Pretreatment:

No special work needed directly before applying the blender.

Application

Note Protective garments and equipment in accordance with work safety regulations must be worn:

Respirator mask, type A2/P2.

Protective gloves (e.g. latex or nitrile).

Method of application: “spray”.

  • Apply in multiple, light spray passes on the spray-mist edge zone of the 2-pack clear coat or 2-pack top coat until the transition is homogenous.
  • No flash-off time required for 2-pack clear coat or 2-pack top coat.
Note After any interruption of the spray operation, hold the aerosol upside down, and press the spray button until the valve is empty.
Caution Protective garments and equipment in accordance with work safety regulations must be worn. Observe safety information sheets as well as warnings on the label of the spray can.

After fully emptying the spray can, dispose of as recycling material

Data
Blender
Solids content: 4,8 %
Coverage: Approx. 0.5 mІ per aerosol.
Degree of gloss: Not applicable
VOC content: 766 g/l ± 306 g per aerosol.

Storage

The guaranteed shelf life is 36 months from date of production. May be used until the date stated on the label at latest if stored in sealed original containers at +20 °C.
Blender

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.