Volkswagen Golf Quiz
General information, paint

Slow-drying silicone remover -LLS MAX 008

In this manual: General information, paint
General body repairs, exterior — 230General body repairs, interior — 279General information, paint — 133Vechile- specific paint information — 27Heating, air conditioning — 156Auxiliary heater — 58Air conditioning system with refrigerant R134a — 1297- speed dual clutch gearbox 0CW — 544- cylinder injection engine(1.4 1 direct inction. turbocharger) — 182Fuel supply system - Petrol engines — 59Running gear, axles, steering — 221Brake system — 92Wheels and Tyres guide — 12Guide for using trailers — 11Wheels and Tyres Guide - General Information — 121Brake system (hybrid) — 73Electrical system — 326Communication — 65Electrical system, general information — 111
~2min read

Designation:

Slow-drying silicone remover -LLS MAX 008-

Issued 10.2008

Product description

The slow-drying silicone remover -LLS MAX 008- is a cleaning agent which is rich in active ingredients and whose key features are the simple application and complete evaporation. The raw material basis is a combination of specific solvents.

Properties:

Aerosol formulation made for this specific product for easy application.

Constant atomisation pressure.

Finest aerosol dispersion.

Very high coverage.

First-class painting results.

Easy to apply

Complete evaporation.

Removes silicone, grease, oil, wax, dirt, tar and soot.

Mild, non-aggressive solvent.

Technical data sheet

Application

Recommended for:

Utility for parts painting and spot repairs.

Suitable substrates:

Painted or unpainted metal, plastic or glass surfaces (old or factory paint jobs) which have been coated with a primer or surfacer.
Substrate Suitability
Surfaces coated with primer or surfacer +++
Old or factory paint jobs +++
Plastic parts +++
Metal/glass +++

Properties:

Non-aggressive to painted surfaces.

Removes all kinds of silicone and is an ideal cleaner of dirt and soot.

Removes body cavity sealant or wax.

Removes resin-hardened grease residues, such as on door hinges.

Eliminates oil and grease residues.

Ideal for dissolving tar.

Removes adhesive residues, such as from labels.

Application

Note Protective garments and equipment in accordance with work safety regulations must be worn:

Respirator mask, type A2/P2.

Protective gloves (e.g. latex or nitrile).

Method of application: “spray”.

  • Apply one light spray pass of silicone remover to the surface to be treated, and wipe dry with a clean, dry non-woven cloth.
  • Allow clean surface to dry completely.
  • Heavily soiled parts must be cleaned twice.
  • Replace clothes often - do not use dirty clothes.
Note After any interruption of the spray operation, hold the aerosol upside down, and press the spray button until the valve is empty.
Caution Protective garments and equipment in accordance with work safety regulations must be worn. Observe safety information sheets as well as warnings on the label of the spray can.

After fully emptying the spray can, dispose of as recycling material

Data
Slow-drying silicone remover -LLS MAX 008
Solids content: 0 %
Coverage: Approx. 0.75 to 1.0 mІ per aerosol.
Degree of gloss: Not applicable
VOC content: 620 g/l ± 248 g per aerosol.

Storage

The guaranteed shelf life is 36 months from date of production. May be used until the date stated on the label at latest if stored in sealed original containers at +20 °C.
Slow-drying silicone remover -LLS MAX 008

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.