Volkswagen Golf Quiz
Running gear, axles, steering

Checking shock absorbers when removed

In this manual: Running gear, axles, steering
General body repairs, exterior — 230General body repairs, interior — 279General information, paint — 133Vechile- specific paint information — 27Heating, air conditioning — 156Auxiliary heater — 58Air conditioning system with refrigerant R134a — 1297- speed dual clutch gearbox 0CW — 544- cylinder injection engine(1.4 1 direct inction. turbocharger) — 182Fuel supply system - Petrol engines — 59Running gear, axles, steering — 221Brake system — 92Wheels and Tyres guide — 12Guide for using trailers — 11Wheels and Tyres Guide - General Information — 121Brake system (hybrid) — 73Electrical system — 326Communication — 65Electrical system, general information — 111
~1min read

Defective shock absorbers can be identified by loud rumbling noises when driving, caused by wheel hopping, especially on bad roads. Heavy fluid leakage is an additional visual indication. Note

Shock absorbers are maintenance-free; shock absorber fluid cannot be topped up.

After removal, a shock absorber can be checked by hand as follows:

  • Compress shock absorber by hand.
The piston rod should move smoothly over the entire stroke with uniform resistance and without jolts.
  • Release piston rod.
If the shock absorber has sufficient gas pressure the piston rod will return by itself to its original position. Note If this is not the case, the shock absorber does not necessarily need to be renewed. Provided there has been no major loss of fluid, it will still be as effective as a conventional shock absorber. Even without gas pressure, the shock absorber will provide full damping effect as long as there has been no major loss of fluid. However, it may produce more noise.

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.