Electrical system, general information

Crimping pliers -VAS 1978/1A

~1min read
Crimping pliers -VAS 1978/1A- or crimping pliers (base tool) -VAS 1978/1-2- together with head adapter 0.35 - 2.5 mmІ -VAS 1978/1-1- or head adapter 4.0 - 6.0 mmІ -VAS 1978/2A- are used to squeeze together crimp connectors from the wiring harness repair sets.

Crimping connectors using crimping pliers -VAS 1978/1A- → Chapter.

The following heads adapters are available for crimping pliers (base tool) -VAS 1978/1-2-:

Head adapter 0.35 mm 2 - 2.5 mm 2 -VAS 1978/1-1-

Head adapter 4.0 mm 2 - 6.0 mm 2 -VAS 1978/2A-

Head adapter for JPT contacts -VAS 1978/9-1-

In conjunction with head adapter for JPT contacts -VAS 1978/9-1-, the crimping pliers are used to crimp contacts to single wires during repairs to wiring with cross sections up to 0.35 mm2 → Chapter.

Interchanging head adapter:

  • Open up the crimping pliers fully.
Crimping pliers -VAS 1978/1A
  • Unclip both locking pins -arrows- from the body of the crimping pliers.
Crimping pliers -VAS 1978/1A
  • Insert the required head adapter from above -arrow- in the body of the crimping pliers.
Crimping pliers -VAS 1978/1A
  • Lock the head adapter by engaging the pins -arrows- in the body of the crimping pliers.
Crimping pliers -VAS 1978/1A

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.