Volkswagen Golf Quiz
Electrical system, general information

Round connector systems

In this manual: Electrical system, general information
General body repairs, exterior — 230General body repairs, interior — 279General information, paint — 133Vechile- specific paint information — 27Heating, air conditioning — 156Auxiliary heater — 58Air conditioning system with refrigerant R134a — 1297- speed dual clutch gearbox 0CW — 544- cylinder injection engine(1.4 1 direct inction. turbocharger) — 182Fuel supply system - Petrol engines — 59Running gear, axles, steering — 221Brake system — 92Wheels and Tyres guide — 12Guide for using trailers — 11Wheels and Tyres Guide - General Information — 121Brake system (hybrid) — 73Electrical system — 326Communication — 65Electrical system, general information — 111
~1min read
Note If necessary, any housing catches in place (secondary locking mechanisms) must be released or removed prior to disengaging the contacts using the prescribed tool → Chapter.
  • Insert the release tool appropriate for the contact housing in the release port of the contact housing.
  • Grab hold of the contact by the wire and push it lightly into the contact housing -arrow-.
Note By pushing the contact in the direction of the contact housing, the locking tabs of the contact are lifted up by the housing edge and disengaged using the release tool.
  • At the same time, push the release tool in the direction of the contact housing -arrow- and pull out the released contact from the contact housing.
Round connector systems
  • The release tool can be pulled out of the contact housing again once the contact has been removed.
Round connector systems

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.