Volkswagen Golf Quiz
General body repairs, exterior

Removing and installing bonnet release lever

In this manual: General body repairs, exterior
General body repairs, exterior — 230General body repairs, interior — 279General information, paint — 133Vechile- specific paint information — 27Heating, air conditioning — 156Auxiliary heater — 58Air conditioning system with refrigerant R134a — 1297- speed dual clutch gearbox 0CW — 544- cylinder injection engine(1.4 1 direct inction. turbocharger) — 182Fuel supply system - Petrol engines — 59Running gear, axles, steering — 221Brake system — 92Wheels and Tyres guide — 12Guide for using trailers — 11Wheels and Tyres Guide - General Information — 121Brake system (hybrid) — 73Electrical system — 326Communication — 65Electrical system, general information — 111
~1min read

Removing
Removing and installing bonnet release lever
  • Tighten release lever -1- and unlock bonnet.
  • Insert a small screwdriver in gap between release lever -1- and retaining clip -2-.
  • Lever retaining clip -2- out of release lever -1--arrow b- and pull release lever off mounting bracket -3--arrow a-.
For further work on mounting bracket -3-, A-pillar lower trim -4- must be removed → General body repairs, interior; Rep. gr.70.

Installing
Removing and installing bonnet release lever
l Lower A-pillar trim -3- is installed.
  • Push retaining clip -2- into release lever -1-.
  • Press retaining lever -1- onto mounting bracket -4-.
  • Before closing bonnet, check function of release lever and cable.

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.