Volkswagen Golf Quiz
4- cylinder injection engine(1.4 1 direct inction. turbocharger)

Removing and installing engine speed sender -G28-

In this manual: 4- cylinder injection engine(1.4 1 direct inction. turbocharger)
General body repairs, exterior — 230General body repairs, interior — 279General information, paint — 133Vechile- specific paint information — 27Heating, air conditioning — 156Auxiliary heater — 58Air conditioning system with refrigerant R134a — 1297- speed dual clutch gearbox 0CW — 544- cylinder injection engine(1.4 1 direct inction. turbocharger) — 182Fuel supply system - Petrol engines — 59Running gear, axles, steering — 221Brake system — 92Wheels and Tyres guide — 12Guide for using trailers — 11Wheels and Tyres Guide - General Information — 121Brake system (hybrid) — 73Electrical system — 326Communication — 65Electrical system, general information — 111
~1min read

Special tools and workshop equipment required

Socket AF 4 mm -T10370-

Removing

  • Remove noise insulation → General body repairs, exterior; Rep. gr.66.
Removing and installing engine speed sender -G28-
  • Unscrew bolt -arrow- and push charge air cooling pump -V188- to one side.
Removing and installing engine speed sender -G28-
  • Disconnect electrical connector -1-.
  • Unscrew bolt -2- and remove engine speed sender -G28-.

Installing

Note

Carefully insert engine speed sender -G28- in bore!

This will prevent the engine speed sender -G28- from falling between engine and gearbox.
  • Install in reverse order.
  • Install noise insulation → General body repairs, exterior; Rep. gr.66.

Specified torques

→ Chapter „Assembly overview - ignition system“

→ Chapter „Assembly overview - electric coolant pump“
Removing and installing engine speed sender -G28-

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.