4- cylinder injection engine(1.4 1 direct inction. turbocharger)

Removing and installing knock sensor 1 -G61

~1min read

Removing

  • Remove air conditioner compressor from bracket and tie up → Heating, air conditioning; Rep. gr.87.
  • Disconnect electrical connector -1-.
  • Unscrew bolt -2- and remove knock sensor 1 -G61-.

Installing

Installation is carried out in the reverse order; note the following:

  • Install air conditioner compressor → Heating, air conditioning; Rep. gr.87.

Specified torques

→ Chapter „Assembly overview - ignition system“

Removing and installing knock sensor 1 -G61

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.