Volkswagen Golf Quiz
4- cylinder injection engine(1.4 1 direct inction. turbocharger)

Removing and installing flywheel

In this manual: 4- cylinder injection engine(1.4 1 direct inction. turbocharger)
General body repairs, exterior — 230General body repairs, interior — 279General information, paint — 133Vechile- specific paint information — 27Heating, air conditioning — 156Auxiliary heater — 58Air conditioning system with refrigerant R134a — 1297- speed dual clutch gearbox 0CW — 544- cylinder injection engine(1.4 1 direct inction. turbocharger) — 182Fuel supply system - Petrol engines — 59Running gear, axles, steering — 221Brake system — 92Wheels and Tyres guide — 12Guide for using trailers — 11Wheels and Tyres Guide - General Information — 121Brake system (hybrid) — 73Electrical system — 326Communication — 65Electrical system, general information — 111
~1min read

Special tools and workshop equipment required

Counterhold -3067-

Removing

Gearbox removed
Removing and installing flywheel
  • Insert counterhold -3067- in hole on cylinder block -item B-.
  • Loosen and remove flywheel bolts.

Installing

Installation is carried out in the reverse order; note the following:

Note

Renew bolts that are tightened with specified tightening angle.

Flywheel with sender wheel can only be fitted in one position.

  • Insert counterhold -3067- in hole in cylinder block -item A-.

Specified torques

→ Chapter „Assembly overview - cylinder block, gearbox end“
Removing and installing flywheel

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.