Electrical system

Removing and installing headlight washer system pump -V11-, »R«

~1min read

Special tools and workshop equipment required

Drip tray

Removing

  • Remove washer fluid reservoir → Chapter.
  • Disconnect connector -1- from headlight washer system pump -V11-.
  • Turn headlight washer system pump -V11--2- approx. 45° in direction of arrow -A-.
  • Pull headlight washer system pump -V11--2- out of washer fluid reservoir in direction of arrow -B-.
  • If necessary, remove seal -3- from washer fluid reservoir.

Installing

Install in the reverse order of removal, observing the following:

  • Check sealing grommet -3- for damage.
  • Insert sealing grommet -3- in opening in washer fluid reservoir, and ensure it is seated correctly.
  • Moisten sealing grommet -3- with washer fluid to ease installation of headlight washer system pump -V11-.
Note When connecting the washer fluid line, ensure that the securing clip engages audibly in the connection.
Removing and installing headlight washer system pump -V11-, »R«

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.