Volkswagen Golf Quiz
Electrical system

Removing and installing pop-up cylinder, »R«

In this manual: Electrical system
General body repairs, exterior — 230General body repairs, interior — 279General information, paint — 133Vechile- specific paint information — 27Heating, air conditioning — 156Auxiliary heater — 58Air conditioning system with refrigerant R134a — 1297- speed dual clutch gearbox 0CW — 544- cylinder injection engine(1.4 1 direct inction. turbocharger) — 182Fuel supply system - Petrol engines — 59Running gear, axles, steering — 221Brake system — 92Wheels and Tyres guide — 12Guide for using trailers — 11Wheels and Tyres Guide - General Information — 121Brake system (hybrid) — 73Electrical system — 326Communication — 65Electrical system, general information — 111
~1min read

Special tools and workshop equipment required

Drip tray

Removing

Note Removal and installation are described for the left side. Removal and installation on the right side are carried out in the same way.
  • Remove front part of right wheel housing liner → General body repairs, exterior; Rep. gr.66.
  • Place drip tray under washer fluid reservoir.
  • Release securing clip of water line. Pull water line off headlight washer system pump -V11-, and unclip it from washer fluid reservoir.
  • Collect washer fluid in drip tray.
  • Remove front bumper → General body repairs, exterior; Rep. gr.63.
  • Press release button -1- in direction of arrow -A-.
  • Pull water hose -2- off pop-up cylinder -3- in direction of arrow -B-.
Removing and installing pop-up cylinder, »R«
  • Working with compressed air, drive pop-up cylinder together with cap -1- out of bumper cover and hold it in place.
  • Press cap -1- on both sides out of upper mountings -2- in direction of arrow -A-.
  • Swing cap -1- in direction of arrow -B- and unclip it from lower mountings -3-.
Removing and installing pop-up cylinder, »R«
  • Press release buttons -1- in direction of arrow -A-.
  • Pull pop-up cylinder -2- downwards out of mounting -3-.

Installing

Install in the reverse order of removal, observing the following:

Note

Observe the markings distinguishing the pop-up cylinders for left and right.

Ensure that the pop-up cylinder engages audibly when being pushed into the mounting. When connecting the washer fluid line, ensure that the securing clip engages audibly in the connection.
Removing and installing pop-up cylinder, »R«

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.