Volkswagen Golf Quiz
Electrical system

Removing and installing washer jets

In this manual: Electrical system
General body repairs, exterior — 230General body repairs, interior — 279General information, paint — 133Vechile- specific paint information — 27Heating, air conditioning — 156Auxiliary heater — 58Air conditioning system with refrigerant R134a — 1297- speed dual clutch gearbox 0CW — 544- cylinder injection engine(1.4 1 direct inction. turbocharger) — 182Fuel supply system - Petrol engines — 59Running gear, axles, steering — 221Brake system — 92Wheels and Tyres guide — 12Guide for using trailers — 11Wheels and Tyres Guide - General Information — 121Brake system (hybrid) — 73Electrical system — 326Communication — 65Electrical system, general information — 111
~1min read

Removing

Note Removal and installation are described for the left side. Removal and installation on the right side are carried out in the same way.
  • Remove pop-up cylinder → Chapter.
  • Press fasteners in direction of arrow -A-.
  • Pull spray jet -1- out of pop-up cylinder -2-.

Installing

Install in the reverse order of removal, observing the following:

Note Ensure that the spray jet engages audibly when being pushed into the pop-up cylinder.
Removing and installing washer jets

Adjusting spray jets
Note The delivered spray jets are preset by the manufacturer so that there is no need to adjust them following installation.
  • Checking adjustment of spray jets → Booklet36.1.

Washer fluid lines

Repairing washer fluid lines

Note All instructions and notes regarding this chapter are available under → Electrical System, General Information; Rep. gr.92.

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.