4- cylinder injection engine(1.4 1 direct inction. turbocharger)

Removing and installing oil level and oil temperature sender -G266-

~1min read

Removing

  • Drain off engine oil.
  • Disconnect electrical connector -3-.
  • Undo nuts -1- and remove oil level and oil temperature sender -G266--item 4-.

Installing

Installation is carried out in the reverse order; note the following:

Note

Renew seal -2-.

  • Replenish engine oil and check oil level → Booklet.

Specified torques

→ Chapter „Assembly overview - sump and oil pump“

Removing and installing oil level and oil temperature sender -G266-

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.