7- speed dual clutch gearbox 0CW
Removing and installing selector mechanism with selector lever cable
In this manual: 7- speed dual clutch gearbox 0CW
~2min read
Special tools and workshop equipment required |
Removal lever -80 - 200-Brief descriptionIn the interior, the centre console must be removed.The heat shield beneath the vehicle must be removed.Removing
Golf, Golf Estate, Golf SV:
Continued for all vehicles: |
![]() |
Golf, Golf Estate, Golf SV, Passat, Passat Estate only diesel engine:
Continued for all vehicles: |
![]() |
Securing clips for selector lever cable must always be renewed.
Securing clips for selector lever cable must always be renewed.
|
![]() |
InstallingInstall in reverse order of removal. During this step, observe the following: Note
Do not bend or kink selector lever cable.Do not grease selector lever cable.Following installation of selector mechanism, selector lever cable must be checked for ease of movement and be adjusted. |
![]() |
|
![]() |
Golf, Golf Estate, Golf SV:
Continued for all vehicles:
Golf, Golf Estate, Golf SV, Passat, Passat Estate only diesel engine:
Specified torquesSelector housing to body → Chapter |
![]() |
Test yourself
A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?


Caution

Note
