General body repairs, interior
Removing and installing trim panel
In this manual: General body repairs, interior
~1min read
Note
Removal and installation are described for the trim panel on driver side. Follow same instructions for the front passenger side as appropriate. Removal and installation are illustrated for 4-door vehicles. Removal and installation on 2-door vehicles are analogous.
Removing
- Remove front door trim → Chapter.
- Remove exterior mirror adjuster -EX11- with driver side interior locking button for central locking system -E308- → Electrical system; Rep. gr.96.

- Using an appropriate drill bit, drill mounting points -2- of trim panel -1- off door trim, but just until trim panel starts to detach from door trim.
Caution
The door trim must not be damaged when drilling. |
- Carefully release mounting points -2- one after the other and remove trim panel -1- from door trim.
InstallingClamping washers near trim strip (4-door models): qty. 6, 17 mm Ч 7.5 mm. Allocation → Electronic Parts Catalogue. Clamping washers near trim strip (2-door models): qty. 9, 17 mm Ч 7.5 mm. Allocation → Electronic Parts Catalogue Clamping washers near inner door handle: qty. 8, 13.4 mm Ч 6 mm. Allocation → Electronic Parts Catalogue |
- Insert new trim panel -1- into door trim.
- Press clamping washers -2- as far as stop onto pins -3- of trim panel.
- Press remaining clamping washers onto pins of trim panel near inner door handle as described.
- Cut back pins -3- of trim panel above clamping washers -2- to max. 2 mm beyond washers.
- Install exterior mirror adjuster -EX11- with driver side interior locking button for central locking system -E308- → Electrical system; Rep. gr.96.
- Install front door trim → Chapter.

Test yourself
A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?
Caution