4- cylinder injection engine(1.4 1 direct inction. turbocharger)

Vehicles with multilink suspension

~1min read
The connecting pipe can be cut through at the cutting point in order to renew the centre and rear silencers separately.

Cutting point is marked by an indentation on circumference of exhaust pipe.

Special tools and workshop equipment required

Chain-type pipe cutter -VAS 6254-

Vehicles with multilink suspension

Procedure

  • Cut through exhaust pipe at right angles at cutting point -arrows- using chain pipe cutter -VAS 6254-.
Vehicles with multilink suspension
  • Position clamp centrally at side marks -arrows- when installing.
  • Fit rear clamp → Fig..
Vehicles with multilink suspension

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.