4- cylinder injection engine(1.4 1 direct inction. turbocharger)

Vehicles with torsion beam axle

~1min read

Removing

  • If fitted, remove rear left underbody trim → General body repairs, exterior; Rep. gr.66.
  • Remove rear tunnel cross-piece → General body repairs, exterior; Rep. gr.66.
  • Loosen clamp -arrow- and push it to rear.
Risk of accident caused by high weight of silencers.Seek help from a second a mechanic for the following work.
  • Cut exhaust pipe → Chapter.
Vehicles with torsion beam axle
  • Unscrew bolt -2- on left and right.
  • Unscrew bolt -3- and remove silencer -1-.

Installing

Installation is carried out in the reverse order; note the following:

  • Aligning exhaust system free of tension → Chapter.

Specified torques

→ Chapter „Assembly overview - silencers“

→ Chapter „Assembly overview - emission control“

→ General body repairs, exterior; Rep. gr.66

Vehicles with torsion beam axle

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.