Vehicles with multilink suspension

1 -	Rubber mounting

Renew if damaged

2 -

Bolt

20 N·m

3 -

Mounting

Renew if damaged

4 -	Centre silencer

Combined in one unit with rear silencer as original equipment. Can be renewed individually for repair purposes.

Removing and installing → Chapter

Separating exhaust pipes/silencers → Chapter

Aligning exhaust system free of tension → Chapter

5 -	Rubber mounting

Renew if damaged

6 -

Mounting

Renew if damaged

7 -

Bolt

20 N·m

8 -	Rear silencer

In initial equipment, component with centre silencer. Can be renewed individually for repair purposes.

Removing and installing → Chapter

Separating exhaust pipes/silencers → Chapter

Aligning exhaust system free of tension → Chapter

9 -	Rear clamp

Align exhaust system free of tension before tightening → Chapter.

Installation position → Fig.

Tighten threaded connections evenly.

10 -

Nut

30 N·m

Installation position of rear clamp Fit clamp in position shown. Angle -α- = approx. 20°. Bolt connections face to rear. Nuts upwards.