Changing light bulbs in the front bumper

Fig. 203 In right front bumper: Removing light assembly.

Fig. 204 Replacing light bulb in headlight.

1. 1
   Please review and follow the checklist ⇒ Information on light bulb replacement .
2. 2
   Remove the wire bracket from the vehicle tool kit and secure it in the opening in the cover ⇒ Fig. 203 . Pull the cover upward in the direction of the arrow.
3. 3
   Remove the screw ⇒ Fig. 203① using the screwdriver in the vehicle tool kit ⇒ Vehicle tool kit .
4. 4
   Remove the headlight.
5. 5
   Release the connector ⇒ Fig. 204① and disconnect it.
6. 6
   Turn the bulb holder ⇒ Fig. 204② counterclockwise in the direction of the arrow until it stops and remove it toward the rear with the bulb.
7. 7
   Replace the burned out light bulb with a new bulb of the same type.
8. 8
   Insert the bulb holder into the headlight assembly and turn it clockwise until it stops.
9. 9
   Connect the connector ⇒ Fig. 204① on the bulb holder ⇒ Fig. 204② . You must hear the connector click into place.
10. 10
    Insert the headlight.
11. 11
    Tighten the screw ⇒ Fig. 203① with the screwdriver.
12. 12
    Install cover in the bumper ⇒ Fig. 203 .