Overview - Tire Pressure Monitoring Sensor with Valve

1 -	Tire Pressure Monitoring Sensor

Supplied complete as a service part

Removing and Installing. Refer to → Chapter "Tire Pressure Monitoring Sensor with Valve, Removing and Installing". When battery is discharge, the entire Tire Pressure Monitoring Sensor must be replaced After using a wheel repair kit, the bore for the valve and opening of the pressure sensor must be wiped clean.

2 -	Valve Insert

Allocation. Refer to the Parts Catalog.

Replace at every tire change

Note

Use only original manufacturer valve insert, it has a special coating!

3 -	Sealing Washer

is slightly deformed when tightening the union nut -item 6- → Item

4 -

Seal

5 -	Disc Wheel

Mounting tires with emergency running characteristics. Refer to → Chapter "Tires, Mounting, Run-Flat Tires and Ultra High Performance Tires". Mounting tires (wheels with tire pressure monitoring system). Refer to → Chapter "Tires, Mounting, Wheels without and with Tire Pressure Monitoring System"

6 -

Union Nut

8 N·m

7 -

Valve Cap

Use only original valve caps from the repair set. Refer to the Parts Catalog.

Do not use Comfort valve caps and metal caps