Self Help
Install front towing eye
In this manual: Self Help
~1min read
Fig. 169Front bumper, right: Loosen and remove cover
.
Fig. 170Front bumper, right: Screw in towing eye
.
and safety warnings first⇒
to the topic
The mounting for the screw-in towing eye is located at the front right of the bumper, behind a cover ⇒ Fig. 169 .
The towing eye must always be carried in the vehicle.
Observe the notes on towing ⇒ Notes on towing .
Install front towing eye- Remove the towing eye from the onboard tool kit in the luggage compartment ⇒ Onboard tool kit .
- Press on the lower area of the cover ⇒ Fig. 169① to release the cover's latch.
- Remove the cover forward ② and leave it hanging on the vehicle.
- Turn the towing eye counterclockwise as far as it will go into the mounting ⇒ Fig. 170 ⇒
.
Use a suitable tool with which the towing eye can be screwed in fully and firmly into the mounting.
- After towing, unscrew the towing eye clockwise.
- Insert the lower locating lug of the cover into the opening in the bumper and carefully guide the upper locating lug over the edge of the opening, pressing down on the upper locating lug from above if necessary.
- Press on the upper area of the cover until the lower locating lug engages in the bumper.
The towing eye must always be screwed in fully and firmly into the mounting. Otherwise, the towing eye may tear out of the mounting when towing or being towed.
Was this page helpful?