Driving notes when towing
and safety warnings first⇒
to the topic
Towing requires a certain amount of practice, especially when a towing rope is used. Both drivers should be familiar with the special characteristics of towing. Inexperienced drivers should therefore not tow.
While driving, make sure that no impermissible tensile forces and no jerking loads occur. When towing off paved roads, there is always a risk that the attachment parts will be overloaded.
While towing, the direction for turning can be indicated on the vehicle being towed, even though the hazard warning lights are switched on. To do this, with the ignition switched on, move the turn signal lever in the desired direction. The hazard warning flashing is interrupted for the duration of the turn signal. As soon as the turn signal lever returns to the neutral position, the hazard warning flashing automatically resumes.
Driver of the towed vehicle:- Leave the ignition switched on so that the steering wheel is not locked and the turn signals, horn, windshield wipers and windshield washer can be operated.
- Since the power steering does not work when the engine is off, more force is required to steer.
- Considerably more pedal force is required for braking because the brake booster does not work. Do not drive into the towing vehicle from behind.
- Observe the information and notes in the owner's manual of the towing vehicle.
- Accelerate with particular care and gently. Avoid sudden driving maneuvers.
- Brake earlier than usual and with light pedal pressure.
- Observe the information and notes in the owner's manual of the towed vehicle.