While driving

Operation using the controls on the front center console

~1min read
Fig. 111

In the upper part of the center console:
Controls of the heating and fresh air system.

Fig. 112

In the upper part of the center console:
Controls of the air conditioning.

Read and observe the introductory information
and safety warnings first
⇒Introduction
to the topic

Some functions and buttons depend on equipment and on the type of system installed.

Switching off

To switch off the systems, proceed as follows:

Turn the center rotary control ⇒ Fig. 112② to level.



– Cooling mode

Press the button
to switch cooling mode on and off.

/ – Temperature

Use the left rotary control ① to set the temperature.

– Blower

Use the center rotary control ② to set the blower speed.

Air distribution

Use the right rotary control ③ to set the air distribution:

: Air distribution to the upper body via the air vents
in the instrument panel.

: Air distribution to the footwell.


: Air distribution to the windshield and the footwell.


– Defrost windows

Use the right rotary control③ to defrost the
windshield as quickly as possible and clear condensation (defrost function):

Manual air conditioning: In the defrost function, recirculation mode switches off and the air conditioning compressor switches on to dehumidify the air. While the defrost function is switched on, recirculation mode cannot be switched on and the air conditioning compressor cannot be switched off.

– Recirculation mode

Use the slider④ to switch recirculation mode
on and off ⇒ Recirculation mode .

– Rear window heating

Press the buttonIn the upper part of the center console,
switch the rear window heating on and off while the engine is running. The rear window heating switches off after 10 minutes at the latest.

Note
To avoid damage to the rear window heating, do not stick any labels over the heating elements from inside.