While driving
Tips and operating notes
In this manual: While driving
~2min read
and safety warnings first⇒
to the topic
The following tips and operating notes will help you use the system correctly.
Why does the cooling system switch off automatically or fail to switch on?- The engine is not running.
- The blower is switched off.
- The air conditioning fuse has blown.
- The ambient temperature is colder than approximately +3 °C (+38 °F).
- The air conditioning compressor has been temporarily switched off because the engine coolant temperature is too high.
- There is another fault in the vehicle. Have the air conditioning checked by a specialist workshop.
- Keep the air intake in front of the windshield free of ice, snow or leaves to improve heating or cooling performance and prevent the windows from fogging up.
- Keep the air vents in the rear of the luggage compartment clear so that air can flow from front to rear through the vehicle.
- Maximum heating output and the fastest possible defrosting of the windows is achieved once the coolant has reached its operating temperature.
- Switch off recirculation mode.
- Set the blower to level
or
.
- Set the temperature control to the middle position.
- Open all air outlet vents in the instrument panel and adjust their direction.
- Turn the air distribution control to the desired position.
- Manual air conditioning: Press button



on the control panel to switch on the cooling system. In cooling mode, the air is dehumidified.
The dust and pollen filter must be replaced regularly so that it does not reduce the performance of the air conditioning system.
If the vehicle is frequently driven in heavily polluted outside air, the filter may need to be replaced between service intervals.
Water under the vehicleIn high outside air humidity and high ambient temperatures, condensation water can drip from the evaporator of the air conditioning system and form a puddle under the vehicle. This is normal and not a sign of a leak!
Was this page helpful?