While driving

Introduction to the topic

~2min read
This chapter contains information on the following topics:

⇒ Operation using the controls on the front center console

⇒ Air vents

⇒ Recirculation mode

⇒ Seat heating

⇒ Tips and operating notes

The following systems may be installed in your vehicle:

  • Heating and fresh air system or
  • manual air conditioning.

The heating and fresh air system heats and ventilates the vehicle interior. The heating and fresh air system cannot cool.

The manual air conditioning cools and dehumidifies the air. It works most effectively when the windows and the glass sunroof are closed. If the vehicle interior is overheated, ventilating can speed up the cooling process.

Display of activated functions

Illuminated LEDs on rotary controls and buttons indicate that a function is switched on.

Warning
Poor visibility through the windows increases the risk of collisions and accidents that can cause serious injury.
  • Keep all windows free of ice, snow and condensation to ensure good visibility.
  • Set the heating, air conditioning and rear window heating so that the windows do not fog up.
  • Only drive off once the windows are clear.
  • Use recirculation mode only for short periods. When the cooling system is switched off, the windows can fog up very quickly in recirculation mode and severely restrict visibility.
  • Switch off recirculation mode when it is not needed.
Warning
Stale air can cause rapid fatigue and loss of concentration in the driver, which can lead to collisions, accidents and serious injury.
  • Never switch off the blower for a long period, and never use recirculation mode for a long period, as no fresh air will enter the interior.
Note
If the air conditioning does not work, switch off the air conditioning and defrost function (on manual air conditioning) immediately and have it checked by a qualified workshop. This prevents consequential damage.