Self Help

Tire Mobility Set components

11steps
~66min
3/5difficulty
Done 0 of 11
Fig. 156

Schematic illustration: components
of the Tire Mobility Set.

Read and observe the introductory information
and safety warnings first
⇒Introduction
to the topic

The Tire Mobility Set may be located in the luggage compartment under the floor covering. It consists of the following components ⇒ Fig. 156 :

  1. Valve core tool
  2. Speed limit sticker
    max. 80 km/h or max. 50 mph
  3. Filler hose with sealing cap
  4. Air compressor
  5. Tire inflation hose
  6. Tire pressure gauge1)
  7. Air release screw2)
  8. ON and OFF switch
  9. 12-volt plug
  10. Tire sealant bottle1)
  11. Replacement valve core

The valve core tool ① has a slot at the lower end into which the valve core fits. This is the only way to unscrew and screw the valve core into the tire valve. This also applies to the replacement valve core ⑪.

1) May also be integrated in the air compressor.

2) A button on the air compressor may be provided instead.

PreparationFirst read and observe the introductory information
and safety warnings

⇒Introduction
to the topic