While driving

Brake assist systems

~6min read
Read and observe the introductory information
and safety warnings first
⇒Introduction
to the topic

The brake assist systems ESC, ABS, EBD, BAS, ASR, TC and EDS only work when the engine is running and make a significant contribution to active driving safety.

Electronic Stabilisation Control (ESC)

ESC helps to reduce the risk of skidding and to improve driving stability by braking individual wheels in certain driving situations. Critical driving dynamics situations, such as oversteer and understeer of the vehicle or spinning of the driven wheels, are detected by ESC. By applying targeted braking or reducing engine torque, the system helps to stabilise the vehicle.

ESC has limits. It is important to understand that ESC cannot override the laws of physics. ESC cannot help in every situation the driver may encounter. For example, ESC cannot always assist when the road surface changes suddenly. If a section of dry road is suddenly covered with water, mud or snow, ESC cannot provide the same assistance as on a dry road. If the vehicle hydroplanes (drives on a film of water instead of the road surface), ESC cannot help the driver steer the vehicle, because contact with the road surface is lost and the vehicle can no longer be braked or steered. When cornering quickly, especially on winding roads, ESC cannot always handle difficult driving situations as effectively as at lower speeds.

Always adapt your speed and driving style to visibility, weather, road and traffic conditions. ESC cannot override physical limits, improve available traction or keep the vehicle on the road if leaving the road was caused by driver inattention. Instead, ESC improves your ability to keep the vehicle under control and, in extreme driving situations, uses the driver's steering input to help the vehicle continue in the intended direction. If you drive at a speed that takes the vehicle off the road before ESC can provide any assistance, ESC will not be able to help.

The ESC system integrates ABS, BAS, ASR and EDS. ESC is always switched on.

Anti-lock Braking System (ABS)

ABS prevents the wheels from locking when braking, down to just before the vehicle comes to a standstill, and helps the driver steer and maintain control. This means that even during full braking, the vehicle is less likely to skid:

  • Press the brake pedal firmly and hold it. Do not release the brake pedal or reduce the pressure on it!
  • Do not pump the brake pedal or reduce the pressure on it!
  • Steer the vehicle while firmly pressing the brake pedal.
  • When you release the brake pedal or reduce the pressure on it, ABS switches off.

ABS control action is noticeable through a pulsating movement of the brake pedal and noises. Do not expect ABS to shorten the braking distance in all conditions. The braking distance can even become longer on gravel, in fresh snow, or on icy or slippery surfaces.

Electronic Brake force Distribution (EBD)

In every vehicle, the center of gravity shifts forward when the brakes are applied. This creates the risk that the rear wheels lock due to reduced traction. Electronic brake force distribution controls the braking force of the rear wheels and ensures optimal distribution of braking force between the front and rear axles. Under normal conditions, it prevents the rear of the vehicle from swerving due to over-braked rear wheels. The electronic brake force distribution function is included in the ABS function.

Brake Assist (BAS)

Brake assist can help reduce the stopping distance. Brake assist additionally boosts braking force hydraulically when the driver presses the brake pedal quickly in an emergency braking situation. As a result, full brake pressure is built up very quickly, braking force is increased and the braking distance is shortened. This activates ABS faster and more effectively.

Do not reduce the pressure on the brake pedal! When you release the brake pedal or reduce the pressure on it, brake assist automatically switches off the additional hydraulic braking boost.

Anti-Slip Regulation (ASR) or Traction Control (TC)

ASR or TC reduces engine drive power when the wheels spin and adapts drive power to road conditions. ASR or TC makes starting, accelerating and driving uphill easier, even on unfavorable road surfaces.

Electronic Differential Lock (EDS)

EDS is available during normal straight-line driving. EDS brakes a spinning wheel and transfers drive power to the other driven wheel. To prevent the disc brake of the braked wheel from overheating, EDS switches off automatically under unusually heavy load. Once the brake has cooled down, EDS switches back on automatically.

Warning
The intelligent technology of the brake assist systems cannot overcome the physical limits and works only within the system limits. Driving fast on icy, slippery or wet roads can lead to loss of vehicle control and serious injury to the driver and passengers.
  • Always adapt your speed and driving style to visibility, weather, road and traffic conditions. The increased safety provided by the braking assistance systems ABS, BAS, EDS, ASR, TC and ESC must not tempt you to take safety risks.
  • Braking assistance systems cannot overcome physical limits. Slippery and wet roads remain very dangerous, even with ESC and the other systems.
  • Driving too fast on wet roads can cause the wheels to lose contact with the road and hydroplane. A vehicle cannot be braked, steered or controlled once it has lost contact with the road.
  • Braking assistance systems cannot prevent an accident if, for example, you follow too closely or drive too fast for the situation.
  • Although braking assistance systems are very effective and help you control the vehicle in difficult driving situations, always remember that driving stability depends on tire grip.
  • When accelerating on slippery roads, for example on ice or snow, accelerate carefully. Even with braking assistance systems, wheels can spin, which can lead to loss of vehicle control.
Warning
The effectiveness of ESC can be significantly reduced if other components and systems that affect driving dynamics have not been properly maintained or are not functioning. This applies to the brakes, tyres and other systems mentioned above, among others.
  • Always remember that modifications and alterations to the vehicle can affect the function of ABS, BAS, ASR, TC, EDS and ESC.
  • Changes to the vehicle's suspension or the use of non-approved wheel and tire combinations can affect the function of ABS, BAS, ASR, TC, EDS and ESC and reduce their effectiveness.
  • The effectiveness of ESC also depends on suitable tires ⇒ Good to know about wheels and tires.

ESC, ASR or TC can only operate without faults if all 4 wheels have the same tire size. Different rolling circumferences of the tires can lead to an unexpected reduction in engine power.

If the ABS malfunctions, ESC, ASR, TC
and EDS also fail.

Operating noises may occur
when the systems described are regulating.