Care, Cleaning, Maintenance

Caring for and Cleaning the Vehicle Exterior

~4min read
Read and observe the introductory information
and safety warnings first
⇒Introduction
to the topic

The following table shows how to clean and care for individual vehicle parts. These are recommendations only. Also observe the notes.

Cleaning and Care Notes
Vehicle part Situation Procedure ⇒
Window panes Glass surfaces Wax residue from car washes or care products. Remove wax residue from all glass surfaces with the glass cleaning cloth - G 052 522 A2 - or a suitable glass cleaner.
Snow. Remove snow from all window panes and exterior mirrors with a hand brush.
Ice. Use de-icing spray. When using a plastic scraper, always push in one direction only. Do not move back and forth.

Do not use warm or hot water.

Wiper blades ⇒ Cleaning and replacing wiper blades
Paintwork Minor paint damage. Touch up with paint pen. Take the paint code from the vehicle identification label ⇒ Technical data. For matte painted surfaces, contact a specialist workshop.
Spilled fuel. Rinse off immediately with water.
Iron particle deposits (rail dust). Remove deposits with a rail dust remover. Do not polish the deposits off!

Then preserve the paint with hard wax. If you have questions, contact a specialist workshop.

Corrosion. Have it removed by a specialist workshop.
On clean paint, water no longer beads off. Preserve the paint with hard wax at least twice a year.
No shine despite preservation / paint looks unsightly. Treat the vehicle, which must be free of dirt and dust, with a suitable polish.

Then preserve the paint with hard wax if the polish used does not contain preserving ingredients.

Deposits, e.g. insect residue, bird droppings, tree resin, road salt. Soften immediately with water and remove with a microfiber cloth.
Oil-based contamination, e.g. cosmetics or sun cream. Remove immediately with mild soap solutiona) and a soft cloth.
Colour differences after removing decorative and protective films. Treat with a suitable polish. Then preserve the paint if the polish used does not contain preserving ingredients.
Decorative films Protective films Dirt. Clean as for paintwork ⇒ Vehicle washing.

Matte decorative films: Use plastic cleaner.

Stubborn dirt. Carefully remove with methylated spirits, then rinse off with warm water.

Matte decorative films: Use plastic cleaner.

Deposits, e.g. insect residue, bird droppings, tree resin, road salt. Soften immediately with water or mild soap solutiona) and remove with a microfiber cloth.
Care. Every 3 months, treat the vehicle, which must be free of dirt and dust, with liquid hard wax. Use only soft microfiber cloths for application.

Do not use hot wax, not even in car washes!

Trim parts Trim strips Dirt. Clean only with a soft cloth and mild soap solutiona) in a dust-free environment. For heavy soiling of stainless steel, use a suitable solvent-free cleaner if necessary.

Anodised surfaces: Do not use chrome care products.

Headlights Tail lights Dirt. Clean with a soft sponge soaked in mild soap solutiona). Do not use cleaners containing alcohol.
Wheels Dirt and road salt. Clean with plenty of water. Do not use paint polish or other abrasive agents.

For light-alloy wheels: Wash every 2 weeks, then treat with an acid-free cleaner. Volkswagen recommends rubbing the wheels with hard wax every 3 months.

Damaged protective paint layer. Touch up immediately with paint pen.
Brake dust. Use a special cleaning agent.
Sensors Dirt. Soft cloth with solvent-free cleaner.
Snow. Remove with a hand brush. Do not use warm or hot water.
Ice. Remove with solvent-free de-icing spray. Do not use warm or hot water.
Door lock cylinders Icing. Volkswagen recommends using Volkswagen Original Spray, which has a lubricating and anti-corrosion effect, to de-ice door lock cylinders. Do not use door lock de-icers containing fat-dissolving substances.
Exhaust tailpipes Road salt deposits. Remove with water and, if necessary, a cleaner suitable for stainless steel. Do not use solvent-based cleaners!
Underbody protection Maintenance. Check the underbody protection regularly and have it repaired if necessary. Do not apply underbody protection or anti-corrosion agents to exhaust pipes, catalytic converters, heat shields or other parts that become hot.
Engine compartment Scuttle panel (area between engine compartment and windscreen) Leaves and other loose objects. Remove with a vacuum cleaner or by hand.
Dirt. Cleaning should always be carried out by a specialist workshop ⇒ .


Water introduced manually into the scuttle panel area, e.g. with a high-pressure cleaner, can cause considerable vehicle damage.

Warning
The engine compartment of the vehicle is a hazardous area. Work on or in the engine compartment can cause injury, scalding, and risk of accident or fire!
  • Before starting work, familiarise yourself with the necessary steps and the generally applicable safety precautions ⇒ Preparations for working in the engine compartment.
  • Volkswagen recommends having the work carried out by a specialist workshop.
Note
Improper cleaning and care can cause damage to the vehicle.
  • Always follow the instructions exactly.
  • Do not use overly hard or scratching cleaning tools.

Environmental influences such as sunlight, humidity,
air pollution, stone chips etc. affect the durability and colour of decorative and protective films. Signs of use and ageing are normal wear and do not constitute a material defect. Decorative films may show signs of use and ageing after approximately 1 to 3 years, protective films after approximately 2 to 3 years. In very hot climates, decorative films may fade within one year. Protective films are more resistant and may fade slightly during the second year.

a) Mild soap solution: Maximum two tablespoons of neutral soap to one litre of water.