Cleaning and replacing windshield wiper blades
Fig. 132Replace the front windshield
wiper blades.
Fig. 133Replace the rear window
wiper blade.
and safety warnings first⇒
to the topic
The windshield wiper blades fitted at the factory are coated with a graphite layer. The graphite layer ensures that the wiper blade moves quietly across the glass. A damaged graphite layer causes, among other things, increased noise when wiping across the glass.
Check the condition of the wiper blades regularly. If the wiper blades chatter, replace them if damaged or clean them if dirty ⇒
.
Replace damaged wiper blades immediately. Wiper blades are available from an authorized service center.
Cleaning windshield wiper bladesNote for the front wipers: Move the wiper arms to the service position before lifting them ⇒ Windshield wipers and washers.
- To lift a wiper arm, hold it only in the area of the wiper blade attachment.
- Carefully clean the wiper blades with a damp sponge ⇒
.
- Carefully place the wiper arms back on the glass.
- Move the wiper arms to the service position before lifting them ⇒ Windshield wipers and washers.
- To lift a wiper arm, hold it only in the area of the wiper blade attachment.
- Press and hold the release button ⇒ Fig. 132①, and at the same time pull the wiper blade off in the direction of the arrow.
- Slide the new wiper blade of the same length and design onto the wiper arm until it clicks into place.
- Carefully place the wiper arms back on the windshield.
- To lift a wiper arm, hold it only in the area of the wiper blade attachment.
- Lift the wiper arm and fold it away.
- Press and hold the release button ①.
- Tilt the wiper blade toward the wiper arm ⇒ Fig. 133 (arrow Ⓐ) and at the same time pull it off in the direction of arrow Ⓑ. A little more force may be required.
- Slide the new wiper blade of the same length and design onto the wiper arm against the direction of the arrow ⇒ Fig. 133Ⓑ until it clicks into place. The wiper blade must be in the folded-away position (arrow Ⓐ).
- Carefully place the wiper arm back on the rear window.
Worn or dirty wiper blades reduce visibility and increase the risk of accidents and serious injury.
- Replace the wiper blades whenever they are damaged or worn, or when they no longer clean the window adequately.
- Damaged or dirty wiper blades can scratch the window.
- Solvent-based cleaners, hard sponges and other sharp-edged objects damage the graphite coating of the wiper blades during cleaning.
- Do not clean the windows with fuel, nail polish remover, paint thinner or similar liquids.
If wax residue from car wash systems and other
care products remains on the front and rear windows, the wipers may chatter. Remove wax residue with a special cleaner or cleaning wipes.