Care, Cleaning, Maintenance

Clean and care for the interior

~4min read
Read and observe the introductory information
and safety warnings first
⇒Introduction
to the topic

The following table shows how to clean and care for individual vehicle parts. These are recommendations only. Also observe the notes.

Modern clothing fabrics, e.g. dark denim, may not be sufficiently colorfast. Especially on light seat covers (fabric or leather), visible stains can result from dye transfer from these clothing fabrics, even with normal use. This is not a defect in the upholstery material, but insufficient colorfastness of the clothing textiles.

Cleaning and Care Notes
Vehicle part Situation Procedure ⇒
Window glass Dirt. Clean with a glass cleaner, then wipe dry with a clean chamois or a lint-free cloth.
Textiles Microfiber Artificial leather Loose surface dirt particles. Remove regularly with a vacuum cleaner so that the material is not permanently damaged by abrasion.
Water-based stains, e.g. coffee, tea, etc. Remove with an absorbent cloth and mild soap solutiona).
Grease-based stains, e.g. oil, make-up, etc. Apply mild soap solutiona), blot dissolved grease and dye residues with an absorbent cloth, then rinse with water if necessary.
Special stains, e.g. ballpoint pen, nail polish, emulsion paint, shoe polish, blood, etc. Use a special stain remover, then treat with mild soap solutiona) if necessary.
Care. Do not use leather care products, solvents, floor wax, shoe polish, stain removers or similar on textiles, microfiber or artificial leather.
Genuine leather Fresh soiling. Remove with a cotton cloth and mild soap solutiona). Clean genuine leather immediately.
Water-based stains, e.g. coffee, tea, etc. Fresh stains: Remove with an absorbent cloth.

Dried-in stains: Treat with a stain remover suitable for leather.

Grease-based stains, e.g. oil, make-up, etc. Fresh stains: Treat with a stain remover suitable for leather and an absorbent cloth.

Dried-in stains: Grease-dissolving spray.

Special stains, e.g. ballpoint pen, nail polish, emulsion paint, shoe polish, blood, etc. Treat with a stain remover suitable for leather.
Care. Apply leather care cream with UV protection and water-repellent effect regularly and after every cleaning, using a colored leather cream if necessary. If the vehicle is parked outdoors for longer periods, protect the leather from direct sunlight by covering it.

Never treat leather with solvents, floor wax, shoe polish, stain removers or similar products.

Plastic parts Dirt. Remove with a soft, damp cloth.
Stubborn dirt. Remove with a soft cloth and a little mild soap solutiona); use a solvent-free plastic cleaner if necessary.
Trim parts Trim strips Dirt. Clean only with a soft cloth and mild soap solutiona) in a dust-free environment. For heavy soiling of stainless steel, use a suitable solvent-free cleaner if necessary.

Anodised surfaces: Do not use chrome care products.

Controls Dirt. Remove coarse dirt with a soft brush. Then clean the controls with a soft cloth and a little mild soap solutiona). Make sure no liquid gets into the controls.
Displays Dirt. Use a soft cloth with a little water, a commercial glass cleaner or LCD cleaner.

Do not clean displays when dry.

Rubber seals Dirt. Clean with a soft, lint-free cloth and plenty of water.
Care. Treat regularly with a suitable rubber care product.
Seat belts Dirt. Pull the seat belt out completely and leave the webbing unrolled. Remove coarse dirt with a soft brush. Clean the seat belt with mild soapy water.

Let the belt webbing dry completely, then retract it.

Wood trim Dirt. Remove with a soft cloth and a little mild soap solutiona).
Cleaning upholstery fabrics on seat surfaces with seat heating and on seats with airbag components

The driver's seat, front passenger seat and, if fitted, the rear seats may contain airbag system components and electrical connectors. Damage, improper cleaning or treatment, or soaking of these seat surfaces and backrests can cause damage to the vehicle's electrical system as well as a malfunction of the airbag system ⇒ .


Seat surfaces with seat heating contain electrical components and connectors that can be damaged by improper cleaning or treatment ⇒. This may also cause damage to
other parts of the vehicle's electrical system.

For this reason, observe the following cleaning instructions:

  • Do not use a high-pressure cleaner, steam jet cleaner or cold spray.
  • Do not switch on the seat heating to dry the seats.
  • Do not use washing pastes or fine-wash detergent solutions.
  • Always avoid soaking the seats.
  • Only use cleaning agents approved by Volkswagen.
  • If in doubt, visit a specialist cleaning service.
Note
Improper cleaning and care can cause damage to the vehicle.
  • Always follow the instructions exactly.
  • Sharp-edged objects, e.g. zippers, rivets on clothing or belts, can leave surface damage. Open hook-and-loop fasteners can also cause damage.
  • Never use a steam cleaner, brushes, hard sponges, etc. for cleaning.
  • Have stubborn stains removed by your specialist workshop to avoid damage.

a) Mild soap solution: Maximum two tablespoons of neutral soap to one litre of water.