Heating, air conditioning

Heater unit

14steps
~84min
3/5difficulty
Done 0 of 14

Assembly overview - Heater unit

The following information refers to left-hand drive vehicles. It applies accordingly to right-hand drive vehicles.

VW UP. Heizung, Klimaanlage

  1. Upper housing
  2. Gasket
  3. Air intake housing
    • with fresh air/recirculation flap
  4. Blower resistor for fresh air blower with overheating protection -N24-
    • Remove and install
  5. Fresh air blower -V2-
    • Remove and install
  6. Fresh air blower housing
  7. Heater unit wiring harness
  8. Flexible cable for air distribution
    • Remove and install
  9. Actuator for defrost and air distribution flap
    • Remove and install
  10. Air distribution housing
  11. Actuator for temperature flap
    • Remove and install
  12. Flexible cable for temperature flap
    • Remove and install
  13. Heat exchanger
    • Remove and install
  14. Gasket
    • Observe installation position.

Removing and installing fresh air blower -V2-

Removal and installation are identical to vehicles with air conditioning.

Removing and installing blower resistor for fresh air blower with overheating protection -N24-

Removal and installation are identical to vehicles with air conditioning.

Removing and installing heat exchanger

It is not necessary to drain the refrigerant and remove the expansion valve. The rest of the removal and installation is identical to vehicles with air conditioning.

Removing and installing heater unit

It is not necessary to drain the refrigerant and remove the expansion valve. The rest of the removal and installation is identical to vehicles with air conditioning.

Disassembling and assembling heater unit

It is not necessary to drain the refrigerant or remove and disassemble the expansion valve and evaporator. The remaining procedure is identical to the vehicle with air conditioning.

Air Routing

Assembly Overview - Air Routing and Air Distribution in Passenger Compartment

The assembly overview Air Routing and Air Distribution in Passenger Compartment is identical to the vehicle with air conditioning.

Removing and Installing Center Air Outlet

Removal and installation are identical to vehicles with air conditioning.

Removing Driver-Side or Passenger-Side Air Outlet

Removal and installation are identical to vehicles with air conditioning.

Removing and Installing Driver Footwell or Passenger Footwell Air Outlet

Removal and installation are identical to vehicles with air conditioning.

Removing and Installing Adapter Piece for Defrost Air Outlet

Removal and installation are identical to vehicles with air conditioning.

Removing and Installing Adapter Piece for Center Air Outlet

Removal and installation are identical to vehicles with air conditioning.

Removing and Installing Fresh Air Intake

Removal and installation are identical to vehicles with air conditioning.

Removing and Installing Forced Ventilation of Passenger Compartment

Removal and installation are identical to vehicles with air conditioning.

Checking Forced Ventilation of Passenger Compartment

Removal and installation are identical to vehicles with air conditioning.