Instrument and control functions

Handlebar switches

2steps
~12min
1/5difficulty
Done 0 of 2
Left
Left

1. Pass switch "PASS" 2. Dimmer switch "/"
3. Turn signal switch "/"
4. Horn switch""


Right
Right
  1. Engine stop switch "/"
  2. Start switch""
Pass switch "PASS"

Press this switch to flash the headlight.

Dimmer switch "/"

Set this switch to""
for the high beam and to""
for the low beam.

Turn signal switch "/"

To signal a right-hand turn, push this switch to"".
To signal a left-hand turn, push this switch to"".
When released, the switch returns to the center position. To cancel the turn signal lights, push the switch in after it has returned to the center position.

Horn switch""

Press this switch to sound the horn.

Engine stop switch "/"
Set this switch to""
before starting the engine. Set this switch to"

"
to stop the engine in case of an emergency, such as when the vehicle overturns or when the throttle cable is stuck.

Start switch""

Push this switch to crank the engine with the starter. See page 5-1 for starting instructions prior to starting the engine.

Test yourself

A quick Yamaha YZF-R125 quiz: every answer comes with an explanation and a link to the manual page.