Yamaha YZF-R125 Quiz
Instrument and control functions

Rider seat

In this manual: Instrument and control functions
Introduction — 1Important manual information — 1Safety information — 9Description — 4Instrument and control functions — 16For your safety - pre-operation checks — 1Operation and important riding points — 6Periodic maintenance and adjustment — 43Motorcycle care and storage — 4Specifications — 1Consumer information — 2
7steps
~42min
2/5difficulty
Done 0 of 7
To remove the rider seat
  1. Insert the key into the seat lock, and then turn it clockwise.

  1. Seat lock

  2. Open.

  3. Pull the rider seat off.
To install the rider seat

1. Insert the projection on the front of the rider seat into the seat holder as shown.


  1. Projection

  2. Seat holder

  3. Push the rear of the rider seat down to lock it in place.
  4. Turn the key counterclockwise, and then remove it.
TIP
Make sure that the rider seat is properly secured before riding.

Test yourself

A quick Yamaha YZF-R125 quiz: every answer comes with an explanation and a link to the manual page.