Сохранение новых эталонных значений для мониторинга давления инфляции в шинах

In order for the tire inflation pressure monitoring system¹ to function correctly, inflation pressure reference values must be saved correctly. To help ensure that the system can correctly alert the driver of low inflation pressure, this must be done each time the tires are changed or the inflation pressure is adjusted.

For example, when driving with a heavy load or at high speeds (over 160 км/ч), tire pressure should be adjusted to the Volvorecommended tire pressure values. Затем система должна быть сброшена, сохранив новое давление инфляции.

Чтобы сохранить новое инфляционное давление в качестве эталонного значения в системе:

1. 1
   Выключите зажигание.
2. 2
   Inflate the tire to the correct inflation pressure; see the tire pressure placard on the driver's side B pillar for recommended pressures for factory-mounted tires.
3. 3
   Запустить автомобиль.
4. 4
   Open the Статус автомобиля app in App view.
5. 5
   Tap TPMS.
6. 6
   Tap Хранить давление.
7. 7
   Tap ХОРОШО to confirm that the tire pressure in all four tires has been checked and adjusted.
8. 8
   Возьмите с собой транспортное средство, пока новое инфляционное давление не будет сохранено. The new inflation pressure is stored when the vehicle is driven at speeds over 35 км/ч. > When enough data has been collected for the system to detect low inflation pressure, the animation showing the progress of the storing procedure will disappear from the center display. The system will not provide any further confirmation that the new inflation pressure has been stored.

If storing cannot be performed, Хранение давления безуспешно. Попробуйте еще раз. will be displayed.

¹ Система мониторинга давления в шинах (TPMS)