Body

Center Console Insert, Removing and Installing

~3min read

Special tools and workshop equipment required

  • Trim Removal Wedge -3409-

Removing

- Versions with a selector lever: move the selector lever into "D/S".

- Turn off the ignition.

- Lift the selector lever/shift lever boot by hand or carefully pry it out on the side with the Trim Removal Wedge -3409--arrows- and fold it upward.

A34-10999

- Tape off the center console cover rings around the center console insert with adhesive tape, to prevent damage to the surface.

Caution

The retainer on the Access/Start Authorization Button -E408- can be damaged if the center console is lifted too high because the electrical wire to the button is short. Loosen and lift the center console insert carefully.

- Reach with the hand under the center console insert -arrow A- and carefully remove it upward from the center console -arrow B-.

- Disconnect the connectors and carefully remove the center console insert -1- over the selector lever/gearshift lever.

Installing

Install in reverse order of removal. Note the following:

Installation notes, for example tightening specifications, replacing components. Refer to → Chapter "Overview - Center Console".

A68-10546

Front Center Console Storage Compartment, Removing and Installing

Removing

- Remove the center console. Refer to → Chapter "Center Console, Removing and Installing".

- Remove the rear bracket for the center console. Refer to → Chapter "Center Console Bracket, Removing and Installing".

- Free up the electric wires -arrow-.

- Remove the screws -2 through 7- and remove the storage compartment -1- downward.

- Versions with Telephone Baseplate -R126-: Remove the Telephone Baseplate -R126-. Refer to → Communication; Rep. Gr.91; Telephone System; Telephone Baseplate R126, Removing and Installing.

Installing

Install in reverse order of removal. Note the following:

Installation notes, for example tightening specifications, replacing components. Refer to → Chapter "Overview - Center Console".

A68-10473

Front Footwell Center Console Trim Panel, Removing and Installing

Special tools and workshop equipment required

  • Wedge Set -T10383-

Removing

- Unclip the center console cover -1- using the Wedge Set -T10383/1--arrow- and remove it.

Installing

Install in reverse order of removal. Note the following:

Installation notes, for example tightening specifications, replacing components. Refer to → Chapter "Overview - Center Console".

A68-10551

Center Console, Removing and Installing

Removing

- Remove the center console insert. Refer to → Chapter "Center Console Insert, Removing and Installing".

- Remove the storage compartment.

- Remove the center console rear trim. Refer to → Chapter "Center Console Rear Trim, Removing and Installing".

- Remove the rear vent air duct. Refer to → Heating, Ventilation and Air Conditioning; Rep. Gr.87; Air Guide; Air Distribution Channels, Removing and Installing.

- Vehicles with a Telephone Baseplate -R126-: disconnect the connectors and free up the wires.

- Versions with USB Connection Baseplate -R193-: remove the External Audio Source Connection -R199-. Refer to → Communication; Rep. Gr.91; Connection for External Multimedia Devices.

- Version with ambient lighting: disconnect the ambient lighting connector and free up the wires.

- Vehicles with a 12V outlet: disconnect the connector -2-.

- Remove the bolts -1 and 3-.

A68-10298

- Remove the nuts -1- from the center console bracket.

Note

Vehicles without a center armrest: remove the two nuts.

A68-10548

Market-Specific

- Pull the air duct -1- to the rear and remove it.

- Remove the nuts -arrow- from the center console bracket.

Continuation for All Vehicles

- Disconnect the connectors and free up the wiring.

- Lift the center console and remove it back out of the instrument panel and over the selector lever/shift lever.

Installing

Install in reverse order of removal. Note the following:

- Set the center console in place and guide the electrical connectors through the opening in the center console.

Installation notes, for example tightening specifications, replacing components. Refer to → Chapter "Overview - Center Console".

A68-10650