Vehicle Care
Headlamps
In this manual: Vehicle Care
8steps
~48min
2/5difficulty
Done 0 of 8
To replace one of the headlamp bulbs, use the following procedure.
To replace the parking/turn signal lamp bulb, see Front Turn Signal and Parking Lamps on page 10-28.
- Open the hood. See Hood on page 10-3.

- Remove the filler panel fasteners (1) and remove the filler panel.
- Remove the three screws (2) retaining the headlamp assembly.
- Pull the headlamp assembly straight forward releasing the retaining studs from the grommets.

- Disconnect the electrical connector from the bulb assembly.
- Turn the bulb assembly counterclockwise to remove it from the housing.
- Replace the old bulb with a new one.
- Reverse Steps 1-6 to reinstall.
Once the new bulb is installed, reassemble the headlamp assembly by reversing the removal steps. Connect the electrical connector, secure the headlamp in place with any retaining clips or screws, and test the new bulb to ensure it illuminates properly. Repeat the process for the other headlamp if necessary. Regularly inspecting and replacing headlamp bulbs is essential for maintaining optimal visibility and safety while driving your Chevrolet Captiva.
Test yourself
A quick Chevrolet Captiva quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?