Chevrolet Captiva Quiz
Vehicle Care

Taillamps, Turn Signal, Stoplamps, and Back-Up Lamps

In this manual: Vehicle Care
Introduction — 1In Brief — 23Keys, Doors, and Windows — 12Seats and Restraints — 17Storage — 4Instruments and Controls — 34Lighting — 8Infotainment System — 14Climate Controls — 4Driving and Operating — 38Vehicle Care — 42Service and Maintenance — 7Technical Data — 3OnStar — 3
11steps
~66min
3/5difficulty
Done 0 of 11

To replace one of these bulbs:

Taillamps, Turn Signal, Stoplamps, and Back-Up Lamps
  1. Back-Up Lamp
  2. Turn Signal Lamp
  3. Stoplamp/Taillamp
  4. Taillamp
    Taillamps, Turn Signal, Stoplamps, and Back-Up Lamps
  5. Open the liftgate. See Liftgate on page 2-8.
  6. Remove the two screws holding in the taillamp assembly.
  7. Slide the taillamp assembly rearward and away from the vehicle.
  8. Turn the bulb socket being replaced counterclockwise to disconnect it.
  9. Pull the bulb out of the bulb socket.
  10. Push the new bulb into the bulb socket.
  11. Reverse Steps 2-4 to reinstall the taillamp assembly.

Test yourself

A quick Chevrolet Captiva quiz: every answer comes with an explanation and a link to the manual page.