Chevrolet Cruze Repair Manual

Front Fender Replacement

10steps
~60min
3/5difficulty
0102030405086N·mlb·ft
Tightening torque found on this page
Done 0 of 10
Chevrolet Cruze. Front Fender Replacement

Preliminary Procedure

  1. Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement
  2. Remove front bumper fascia guide. Refer to Front Bumper Fascia Replacement
  3. Remove the wheelhouse liner. Refer to Front Wheelhouse Liner Replacement
  4. Remove the headlamp. Refer to Headlamp Replacement
  5. Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement
  6. Remove the front fender shipping cover. Refer to Front Fender Shipping Cover Replacement
  7. Remove the front fender insulator. Refer to Front Fender Insulator Replacement
  8. Front Fender Bolt (Qty: 7) Caution: Refer to Fastener Caution in the Preface section.
Tighten 8 N·m
  • Front Fender Bolt
  • Tighten 8 N·m

    1. Front Fender Bolt

    Tip Simply loosen the bolt rather than remove.

    Tighten 8 N·m

    1. Front Fender

    Front Fender Shipping Cover Replacement

    Chevrolet Cruze. Front Fender Shipping Cover Replacement
    1. Front Fender Insulator Retainer
    2. Front Fender Shipping Cover

    Test yourself

    A quick Chevrolet Cruze quiz: every answer comes with an explanation and a link to the manual page.