Chevrolet Cruze Repair Manual

Hood Primary and Secondary Latch Replacement

5steps
~30min
2/5difficulty
010203040502015N·mlb·ft
Tightening torque found on this page
Done 0 of 5
Chevrolet Cruze. Hood Primary and Secondary Latch Replacement

Preliminary Procedure

  1. Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement.
  2. Remove the radiator grille support reinforcement. Refer to Radiator Grille Reinforcement Support Replacement.
  3. Hood Primary and Secondary Latch Retainer Bolt (Qty: 2) Caution: Refer to Fastener Caution in the Preface section.
Tighten 20 N·m.
  • Hood Primary and Secondary Latch
  • Procedure

    1. To release the hood primary and secondary latch unhook the hood primary latch release cable.
    2. Disconnect electrical connectors as needed.

    Test yourself

    A quick Chevrolet Cruze quiz: every answer comes with an explanation and a link to the manual page.