Chevrolet Cruze Repair Manual

Front Side Door Window Adjustment

10steps
~60min
3/5difficulty
01020304050107N·mlb·ft
Tightening torque found on this page
Done 0 of 10
Chevrolet Cruze. Front Side Door Window Adjustment

Warning: Refer to Glass and Sheet Metal Handling Warning in the Preface section.

Warning: Refer to Express Window Down Warning in the Preface section.

Preliminary Procedure

  1. Remove the front side door trim. Refer to Front Side Door Trim Replacement.
  2. Remove the water deflector. Refer to Front Side Door Water Deflector Replacement.
  3. Front Side Door Window Regulator Sash Nut (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten 10 N·m

  1. Front Side Door Window

Procedure

  1. Loosen the window regulator sash nuts.
  2. Connect the door trim panel wire connector.

Note: Start the vehicle to ensure maximum power to the window motor. This is required in order to fully seat the window for adjustment.

  1. Start the vehicle.
  2. Using the power window switch, raise the window to the full up position.
  3. Tighten the front side door window regulator sash nuts.
  4. Inspect for proper window operation and a tight seal.
  5. Shut off the vehicle.

Test yourself

A quick Chevrolet Cruze quiz: every answer comes with an explanation and a link to the manual page.