Driving and Operation
Switching On
In this manual: Driving and Operation
~1min read
Press down the switch button
the indicator light will illuminate
. Accelerate to the desired speed and turn the thumbwheel toward SET/- or RES/+. The current vehicle speed will be stored in the system memory and maintained. You can then take your foot off the accelerator pedal.
To increase vehicle speed, press the accelerator pedal. When the accelerator pedal is released, the vehicle returns to the previously stored speed.
The speed cannot be reduced by turning the switch toward SET/- when first gear is selected.
Test yourself
A quick Chevrolet Cruze quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?