Heated Front Seats

The heated front seat controls are located in the Uconnect system. You can access the controls through the climate control screen and the touchscreen.

You can select HI, LO, or OFF heat settings. The indicator arrows in the touchscreen buttons show the level of heat in use. Two indicator arrows will illuminate for HI and one for LO. Turning the heating elements off will return the user to the radio screen.

• Press the seat heat buttononce to select the HI setting.
• Press the seat heat buttona second time to select the LO setting.
• Press the seat heat buttona third time to turn off the heating elements.

If the HI level setting is selected, the system will automatically switch to the LO level after approximately 60 minutes of continuous operation. At that time, the display will change from HI to LO to indicate the change. The LO level setting will turn off automatically after approximately 45 minutes.

NOTE:

• After selecting a heat setting, warmth will be felt within two to five minutes.
• The engine must be running for the seat heaters to operate.

For information on use with the remote start system, refer to the remote start section.

• Persons who may not be able to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medications, alcohol use, exhaustion, or other physical conditions should use caution when using the seat heater. It may cause burns even at low temperatures, especially if used for long periods of time.
• Do not place anything on the seat or seatback that insulates against heat, such as blankets or cushions. This may cause the seat heater to overheat. Sitting on an overheated seat may result in serious burns due to increased seat surface temperature.