Height adjustment of the front seat belts

Height adjustment is possible in 4 different positions.

To adjust, press button A-Fig. 4 and slide handle B up or down.

Always adjust the belt height to suit the occupant's height.

This precaution can significantly reduce the risk of injury in an accident.

The correct setting is obtained when the belt runs approximately midway between shoulder and neck.

Seat belt height can only be adjusted with the vehicle stationary.

After adjusting, always check that the slider, to which the ring is attached, has engaged in one of the preset positions.

To do this, with handle A-Fig. 4 released, push down to allow the anchorage to engage if releasing the handle did not result in engagement in one of the preset positions.