Cold tyre inflation pressure (bar)
With warm tyres, the pressure must be +0.3 bar above the prescribed value. Always check the correct value with cold tyres. With winter tyres, the pressure must be +0.2 bar above the prescribed value for the standard tyres.
Panda versions

(*) Where provided, depending on version/market
(**) 0.9 TwinAir 60HP/80HP engines
(***) Natural Power versions
Panda Cross 4x2 / Panda Cross 4x4 / Panda 4x4 versions

(°) For versions/markets where provided.
(*) For Panda 4x4 versions
(**) For Panda Cross versions
NOTE For Panda Cross 4x4 and Panda 4x4 versions, do not drive long distances with tyres deliberately under-inflated (not at the prescribed pressure) and/or with significantly different pressures between the front and rear axles, to avoid possible malfunctions of the 4x4 four-wheel drive system.
WARNING 175) The maximum speed of winter tyres marked "Q" must not exceed 160 km/h; for those marked "T", it must not exceed 190 km/h; for those marked "H", it must not exceed 210 km/h; in any case, observe the regulations of the Highway Code in force.176) 185/55 R15 82T tyres are not suitable for snow chains.
177) 175/65 R14 82T tyres are suitable for low-profile snow chains: 9 mm.
178) 175/65 R15 84T tyres are suitable for low-profile snow chains: 7 mm.
179) With chains fitted, keep to a moderate speed; do not exceed 50 km/h. Avoid potholes, do not drive up steps or kerbs, and do not drive long distances on roads without snow, to avoid damaging the vehicle and the road surface.
180) If using full wheel trims fixed (by spring) to the steel rim and non-original, aftermarket tyres fitted with a "Rim Protector", do NOT fit the wheel trims. Using unsuitable tyres and wheel trims may lead to sudden loss of tyre pressure. WARNING 70) With chains fitted, apply the accelerator with extreme care to avoid or minimise wheel spin of the driven wheels, so as not to break the chains, which could cause damage to the bodywork and mechanical components.Test yourself
A quick Fiat Panda quiz: every answer comes with an explanation and a link to the manual page.