Radio (Tuner)

To select the Radio function while listening to another audio source, briefly press the FM AS or AM button, depending on the desired band.

Once Radio mode is active, the display shows the station name (RDS stations only), the frequency of the selected radio station, the selected frequency band (e.g. FM1) and the preset button number (e.g. P1).

Selecting the frequency band

With Radio mode active, briefly press the FM AS or AM button repeatedly to select the desired reception band.

Each press of the button cycles through the AM and FM bands.

Preset buttons

Buttons 1 to 6 allow you to set the following presets:

• 18 in the FM band (6 in FM1, 6 in FM2, 6 in FMT or "FMA" (on some versions));
• 12 in the MW band (6 in MW1, 6 in MW2).

To recall a preset station, select the desired frequency band and then briefly press the corresponding preset button (1 to 6).

Press and hold the corresponding preset button for more than 2 seconds to store the tuned station. Storing is confirmed by an audible signal.

Automatic tuning

Briefly press the buttonorto start the automatic search for the next station that can be received in the selected direction.

Manual tuning

Select the desired frequency band and then briefly and repeatedly press the buttonorto start searching in the desired direction. If the buttonoris pressed longer, fast search is activated, which stops when the button is released.