General Procedures - Washer Hose Repair

Repair

1. 1
   Locate and inspect the damaged washer hose.
2. 2
   Carefully cut the hose and remove the damaged section of washer hose.
   Measurement: 0.5000 in (12.7 mm)

   

3. 3
   Install the windshield washer hose union between the cut hose ends.

   

4. 4
   If necessary, install a segment of 6.4 mm (0.25 in) inside diameter black rubber hose over the washer hose ends and clamp both ends of the rubber hose with spring clamps.