Body and Paint
Removal and Installation — Driver Knee Air Bag
In this manual: Body and Paint
6steps
~36min
4/5difficulty
Done 0 of 6
Removal
- REFER TO: Pyrotechnic Device Handling Precautions (100-00 General Information, Description and Operation).
- Disable the SRS.
Refer to: Supplemental Restraint System (SRS) Disabling (501-20B Supplemental Restraint System, General Procedures). - Remove the driver knee air bag mounting screws.
Torque: 71 lb-in (8 N·m)
- Lower the driver knee air bag.
.jpg)
- Remove the driver knee air bag mounting screws.
- Disconnect the electrical connector and remove the driver knee air bag.
.jpg)
Installation
- To install, reverse the removal procedure.
- Reset the SRS.
Refer to: Supplemental Restraint System (SRS) Reset (501-20B Supplemental Restraint System, General Procedures).
Test yourself
A quick Ford Escape quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?