Ford Fiesta Quiz
Body and Paint

Front Seat Removal and Installation

In this manual: Body and Paint
Service Information — 27Suspension — 48Transmission — 9Brake System — 52Steering — 21Engine — 140Manual Transmission, Clutch, Transfer Case and Power Transfer Unit — 48Exhaust System — 6Fuel System — 21Climate Control System — 58Instrumentation and Warning Systems — 26Battery and Charging System — 20Infotainment Systems — 41Lighting — 29Power Distribution — 11Electronic Function Group — 30Body and Paint — 275Frame and Mounting — 3
7steps
~42min
3/5difficulty
0204060801003526N·mlb·ft
Tightening torque found on this page
Done 0 of 7

Removal

  1. Disarm the SRS.
    Refer to: Supplemental Restraint System (SRS) Disarming and Re-arming (501-20B Supplemental Restraint Systems, General Procedures).
  2. Slide the seat rearward. Remove and discard the seat track bolts.
  3. Slide the seat forward. Remove and discard the seat track bolts.
  4. Disconnect the front seat electrical connector and remove the front seat.

Installation

  1. To install, reverse the removal procedure.

  2. Install the front seat bolts in the following sequence.
    1. Install the front inboard bolt.
      Torque: 26 lb-ft (35 N·m)
    1. Install the front outboard bolt.
      Torque: 26 lb-ft (35 N·m)
    1. Install the rear inboard bolt.
      Torque: 26 lb-ft (35 N·m)
    1. Install the rear outboard bolt.
      Torque: 26 lb-ft (35 N·m)
  3. Re-arm the SRS.
    Refer to: Supplemental Restraint System (SRS) Disarming and Re-arming (501-20B Supplemental Restraint Systems, General Procedures).

Test yourself

A quick Ford Fiesta quiz: every answer comes with an explanation and a link to the manual page.