Ford Fiesta Quiz
Body and Paint

Lumbar Assembly. Removal and Installation

In this manual: Body and Paint
Service Information — 27Suspension — 48Transmission — 9Brake System — 52Steering — 21Engine — 140Manual Transmission, Clutch, Transfer Case and Power Transfer Unit — 48Exhaust System — 6Fuel System — 21Climate Control System — 58Instrumentation and Warning Systems — 26Battery and Charging System — 20Infotainment Systems — 41Lighting — 29Power Distribution — 11Electronic Function Group — 30Body and Paint — 275Frame and Mounting — 3
3steps
~18min
2/5difficulty
010203040503.53N·mlb·ft
Tightening torque found on this page
Done 0 of 3

Removal

  1. Remove the front seatback trim cover.
    Refer to: Front Seatback Trim Cover (501-10 Seat, Removal and Installation).
  2. Remove the screw and move the lumbar drive aside.
    Torque: 31 lb-in (3.5 N·m)
  3. Disconnect the J-hooks of the lumbar support and remove the lumbar support.

Installation

  1. To install, reverse the removal procedure.

Test yourself

A quick Ford Fiesta quiz: every answer comes with an explanation and a link to the manual page.