Ford Fiesta Quiz
Body and Paint

Luggage Compartment Lid Removal and Installation

In this manual: Body and Paint
Service Information — 27Suspension — 48Transmission — 9Brake System — 52Steering — 21Engine — 140Manual Transmission, Clutch, Transfer Case and Power Transfer Unit — 48Exhaust System — 6Fuel System — 21Climate Control System — 58Instrumentation and Warning Systems — 26Battery and Charging System — 20Infotainment Systems — 41Lighting — 29Power Distribution — 11Electronic Function Group — 30Body and Paint — 275Frame and Mounting — 3
5steps
~30min
2/5difficulty
01020304050118N·mlb·ft
Tightening torque found on this page
Done 0 of 5

Removal

  1. Remove the push-pin clips and the luggage compartment lid trim panel.
  2. Disconnect the electrical connectors, remove the wiring harness clips and move the wiring harness aside.
  3. Remove the bolts and the luggage compartment lid.
    Torque: 97 lb-in (11 N·m)

Installation

  1. To install, reverse the removal procedure.
  2. Check the alignment and correct as necessary.
    Refer to: Luggage Compartment Lid Alignment (501-03 Body Closures, General Procedures).

Test yourself

A quick Ford Fiesta quiz: every answer comes with an explanation and a link to the manual page.